Boston Linux & Unix (BLU) Home | Calendar | Mail Lists | List Archives | Desktop SIG | Hardware Hacking SIG
Wiki | Flickr | PicasaWeb | Video | Maps & Directions | Installfests | Keysignings
Linux Cafe | Meeting Notes | Blog | Linux Links | Bling | About BLU

BLU Discuss list archive


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

BBLISA: Re: Linksys BEFSR81 and remote logins?



Hi Jerry et al:

Just before your message, I was able to figure out the port forwarding :)
I can now ssh into my Linux box :)

I also plan to set up sshd on my windows boxes and see if I can have
multiple paths for remote logins.

Regarding firmware, according to Linksys' page, their latest is 2.36, the
same version that is already on the box.

Anyone know different?

Thanks.

Scott

On Thu, 29 Mar 2001, Jerry Feldman wrote:

> Yes. First, for each box you want to telnet or ssh to, you need to set up
> forwarding of the port. This requires that you set up a static ip address
> for the boxes you want to telnet or ssh to. Normally, the Linksys box uses
> 192.168.1.100 as the first dhcp IP address, so you should assign a static
> address of 192.168.1.x to those boxes (where x is 2 <= x < 100).  Then log
> into the linksys box, click on advanced, then click on forwarding. The
> forwarding menu is straight forward. You can forward any port. You can also
> assign one of the hosts as a DMZ host. You also should be running firmware
> rev. 1.37 or later.  I don't recall which, but either 1.35 or 1.36 had a
> serious bug in it.
>
> Scott Ehrlich wrote:
> > Hello to all:
> >
> > I just installed a new Linksys BEFSR81 gateway/router in my home network
> > (RCN for cable and Internet).  I have five machines which are configured
> > via the 192.168 private network.
> >
> > Given the Linksys is the filter now between my PCs and the Internet, is
> > there any way I can remotely log in to my machines from the outside world?
> > I have two Windows boxes (NT 4 and 2000) and two UNIX boxes (Linux and
> > Solaris).
> >
> > Thanks in advance.
> >
> > Scott
> >
> > -
> > Subcription/unsubscription/info requests: send e-mail with
> > "subscribe", "unsubscribe", or "info" on the first line of the
> > message body to discuss-request at blu.org (Subject line is ignored).
> >
>
> --
> Jerry Feldman <gaf at blu.org>
> Boston Linux and Unix user group
> http://www.blu.org
>
>
>
> ---
> Send mail for the `bblisa' mailing list to `bblisa at bblisa.org'.
> Mail administrative requests to `majordomo at bblisa.org'.
>

-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).




BLU is a member of BostonUserGroups
BLU is a member of BostonUserGroups
We also thank MIT for the use of their facilities.

Valid HTML 4.01! Valid CSS!



Boston Linux & Unix / webmaster@blu.org