SCSI termination problem??

[rardoe at rarcom.com (Chris Tresco)]

These should be a setting in the card's alt+a screen to turn on
autotermination.  These should also be a jumper on the drive that will
auto terminate... set both of these to on.

If all else fails, buy a hardware terminator.




On Thu, 2002-06-20 at 22:04, bsdadmins at attbi.com wrote:
> I just bought a Plextor 12/10/32s SCSI writer which 
> also came with a external case.  I have a Adaptec 
> 29160 Ultra160 scsi adapter installed in my system.  
> I first tried to install the drive on the SE 
> controller but when I boot the computer up the 
> adapter yells at me saying:
> 29160      A at slot 06, 00:0D:00 - Insufficient 
> termination detected on the SE connectors
> So I then tried to use the external case and connect 
> it to the external LVD/SE, the only difference is 
> that instead of it saying 'SE connectors' it says 
> 'LVD/SE connectors'.  my scsig controller is set to 
> the default.  Ideas on what I can do?
> 
> I was subscribed to this list but am not right now.  
> Could anyone that could help me plz send me mail to 
> bsdadmins at attbi.com
> 
> Dave
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://www.blu.org/mailman/listinfo/discuss
>