problem of PPP to ISP solved

agaskell at west.bidmc.harvard.edu agaskell at west.bidmc.harvard.edu
Thu Sep 25 13:08:21 EDT 1997


     Okay I've got it....For those who are interested....
     
     All I needed to do was leave the expect-send pairs blank, put in the 
     primary and secondary DNS of Prodigy and then edit the PAP...username 
     and secret. It works a treat now.
     
                        Thanks for all advice given.
     
        - Andrew Gaskell.
     


______________________________ Reply Separator _________________________________
Subject: TCPIP on RHL 4.2 (Biltmore) 
Author:  Glenn Burkhardt <glenn at aoi.ultranet.com>  at smtplink-nedh
Date:    9/23/97 2:25 PM


Regarding agaskell at west.bidmc.harvard.edu 's attempts to get PPP 
running, I don't know quite what to say, except re-check all the 
configuration entries.
     
I just verified for RHL 4.2 (Biltmore) that the drill remains the same:
     
/etc/sysconfig/network-scripts/ifup-ppp:
     
line 75:
 connect "/usr/sbin/chat -v -f /etc/sysconfig/network-scripts/chat-$DEVICE"
     
/etc/syslog.conf:
     
daemon.debug                                            /var/log/messages
     
Use the standard Network Configuration GUI in the control panel to do 
the rest of the PPP setup.
     
Here's what was put in the /var/log/messages file:
     
Sep 23 10:47:57 proteus ifup-ppp: pppd started for ppp0 on /dev/modem at 115200 
Sep 23 10:47:57 proteus ifup-ppp: pppd started for ppp0 on /dev/modem at 115200 
Sep 23 10:47:58 proteus kernel: CSLIP: code copyright 1989 Regents of the 
University of California
Sep 23 10:47:58 proteus kernel: PPP: version 2.2.0 (dynamic channel allocation) 
Sep 23 10:47:58 proteus kernel: PPP Dynamic channel allocation code copyright 
1995 Caldera, Inc.
Sep 23 10:47:58 proteus kernel: PPP line discipline registered. 
Sep 23 10:47:58 proteus kernel: registered device ppp0
Sep 23 10:47:58 proteus pppd[573]: pppd 2.2.0 started by root, uid 0 
Sep 23 10:47:58 proteus pppd[573]: pppd 2.2.0 started by root, uid 0 
Sep 23 10:47:59 proteus chat[577]: abort on (BUSY) 
Sep 23 10:47:59 proteus chat[577]: abort on (ERROR) 
Sep 23 10:47:59 proteus chat[577]: abort on (NO CARRIER) 
Sep 23 10:47:59 proteus chat[577]: abort on (NO DIALTONE) 
Sep 23 10:47:59 proteus chat[577]: abort on (Invalid Login) 
Sep 23 10:47:59 proteus chat[577]: abort on (Login incorrect) 
Sep 23 10:47:59 proteus chat[577]: send (ATZ^M) 
Sep 23 10:47:59 proteus chat[577]: expect (OK) 
Sep 23 10:47:59 proteus chat[577]: ATZ^M^M 
Sep 23 10:47:59 proteus chat[577]: OK -- got it 
Sep 23 10:47:59 proteus chat[577]: send (ATDT453-2906^M) 
Sep 23 10:48:00 proteus chat[577]: expect (CONNECT) 
Sep 23 10:48:00 proteus chat[577]: ^M 
Sep 23 10:48:02 proteus chat[577]: ATDT453-2906^M^M 
Sep 23 10:48:02 proteus chat[577]: NO DIAL TONE^M 
Sep 23 10:48:45 proteus chat[577]: alarm
Sep 23 10:48:45 proteus pppd[573]: Connect script failed 
Sep 23 10:48:45 proteus pppd[573]: Connect script failed 
Sep 23 10:48:45 proteus pppd[573]: Exit.
Sep 23 10:48:45 proteus pppd[573]: Exit. 
Sep 23 10:48:45 proteus chat[577]: Failed
     
I believe that you should at least see messages about the 'pppd' 
starting.
     
What's in your chat script (/etc/sysconfig/network-scripts/chat-ppp0)?  
Normally, you would use the 'Edit PPP Interface' GUI to change this, 
but, of course, emacs works too.  Read the 'chat' man page, and make 
sure that the chat script makes sense.
     
If you like, you can correspond with me directly.  Send the chat-ppp0 
and ifcfg-ppp0 scripts (with passwords marked out!).  We can post a 
resolution note after it's working.  Please include your phone number.
     




More information about the Discuss mailing list