further VMWoes

Derek Atkins warlord at MIT.EDU
Wed Aug 4 11:08:04 EDT 1999


Oh, sorry, I missed your request for a working example.  Here is
my current network configuration:

vmnet1    Link encap:Ethernet  HWaddr 00:50:56:8A:00:00
          inet addr:172.16.118.1  Bcast:172.16.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:193292 errors:0 dropped:0 overruns:0
          TX packets:20226 errors:0 dropped:0 overruns:0

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
172.16.118.0    0.0.0.0         255.255.255.0   U     0      0       40 vmnet1

I have dhcp running on Linux (configured by vmware).  Currently,
my NT guest OS is using 172.16.118.128

-derek

Brian Conway <dogbert at clue4all.net> writes:

> 
> > As for getting host-only w/ masquerade working, that's the setting
> > that I use.  There are two steps:
> > 	1) Get host-only networking working between Linux and VMWare.
> 
> So says the help pages (with not too many details, of course).  With
> bridged networking, the guest OS (10.0.0.130) can get to both the vmnet
> address (10.0.0.2) and the eth0 (10.0.0.1) of the host, as well as outside
> hosts (10.0.0.4).  With host-only, the guest OS with the same ip info can
> neither see the vmnet address or the eth0 of the host.  Any ideas on how
> exactly I should have the various ip/netmask info set up?  A working
> example perhaps?
> 
> > 	2) Get IP Masquerade working.
> 
> Already working.
> 
> I've checked the vmware newsgroups on most of this stuff, but they seem to
> be only a little more helpful than the vague-ish documenation.
> 
> -b
> 
> 

-- 
       Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
       Member, MIT Student Information Processing Board  (SIPB)
       URL: http://web.mit.edu/warlord/      PP-ASEL      N1NWH
       warlord at MIT.EDU                        PGP key available
-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).



More information about the Discuss mailing list