TX errors in eth0 interface

[Jason T. Nelson]

Kyle,

> The root of the problem is most likely very simple, but at this point,
> you're probably better off just moving the card to IRQ 5, 10, or 11 to
> see if it is indeed a problem restricted to IRQ 9.  Let us know what
> happens.

I set it to IRQ 5 and rebooted - unfortunately I'm still getting the same
error.

ne.c:v1.10 9/23/94 Donald Becker (becker at cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x300: 00 40 05 6f 10 32
eth0: NE2000 found at 0x300, using IRQ 5.
eth0: Tx timed out, lost interrupt? TSR=0x43, ISR=0x2, t=877.
eth0: Tx timed out, lost interrupt? TSR=0x43, ISR=0x2, t=7000.
eth0: Tx timed out, lost interrupt? TSR=0x43, ISR=0x2, t=3000.
eth0: Tx timed out, lost interrupt? TSR=0x43, ISR=0x2, t=2000

5:          0          XT-PIC  NE2000

I really don't know now.
Thanks again,
Jason


-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).