Changing SPARC 5 boot device (SCSI ID)

[Derek Martin]

On Mon, 24 Jul 2000, Anthony J. Gabrielson wrote:

> Hello,
> 	Have you read the sun cdrom faq (www.sunhelp.org)?  I could be off
> but shouldn't the cdrom be at id 6 and the tape drive be at id 4?

No... you can give them whatever SCSI ID's you want, but generally the
hard drive (or drives) gets the highest priority on the SCSI bus, other
than the controller itself, and then other devices like the CD and tape
get lower priorities.  The controller gets ID 7, and usually you would
give the hard disk ID 6.  This isn't a hard-and-fast rule though, and you
can generally assign any device any ID you want to, so long as they don't
conflict.


-- 
Derek Martin
System Administrator
Mission Critical Linux
martin at MissionCriticalLinux.com 

-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).