NICS, HUBS and switches.

[Peter Jon White]

According to 3Com, their 100/10 units operate at the higher speed of the 
two nodes communicating.

At 12:30 PM 6/24/00 -0400, Jerry Feldman wrote:
>Just a question. I plan to upgrade my home network to 100 baseT which will
>require a new hub, and at least 1 new NIC.  The question is can a 100Mbit
>hub support 100Mbits between 2 100Mbit NICS when one or both of the other
>hub ports are connected to a 10Mb NIC. Or will just the connection to a
>10Mbit NIC cause the entire network to run at 10. The issue is that the
>Alpha has an on-board 10Mbit NIC and another computer is idle most of the
>time.  I know I can do this with a switch, but that is an overkill.
>--
>Jerry Feldman <gaf at blu.org>
>Boston Linux and Unix user group
>http://www.blu.org
>
>
>-
>Subcription/unsubscription/info requests: send e-mail with
>"subscribe", "unsubscribe", or "info" on the first line of the
>message body to discuss-request at blu.org (Subject line is ignored).

Peter Jon White
Peter White Cycles
666 Mass Ave.
Acton, MA 01720
978 635 0969 Voice
978 929 9654 Fax
www.PeterWhiteCycles.com

-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).