Diabling PnP for 3COM 509-TPO Card

Michael Bilow mike at bilow.com
Tue Feb 6 19:03:08 EST 2001


You can get the DOS utility 3C5X9CFG.EXE as part of the Etherdisk:

	http://support.3com.com/infodeli/tools/nic/3c509/3c5096.1.htm

Before you turn off PnP, be sure to use Windows Control Panel to note
where it likes to put the card and then set those same values manually.

Do not set the modem speed allowance to anything other than 9600 or some
machines will break and do funny things.

There is also no reason you cannot run the card in PnP mode under Linux
using isapnptools, provided that you use a module for the network driver.  
Unless you boot over the network with ROM TFTP or something strange like
that, there is usually no downside to modularizing the network driver.

-- Mike


On 2001-02-06 at 15:19 -0500, Jerry Feldman wrote:

> Check the LInux Ethernet Howto. 
> http://www.ibiblio.org/mdw/HOWTO/Ethernet-HOWTO.html. Has severl 
> aitems regarding the 3Com boards. The 3c509 series is discussed at 
> length. Here is one relevant paragraph:
> ---------------------
> 3c509B users should use either the supplied DOS utility to disable the 
> plug and play support, and to set the output media to what they require. 
> The linux driver currently does not support the Autodetect media setting, 
> so you have to select 10Base-T or 10Base-2 or AUI. Note that to turn off 
> PnP entirely, you should do a 3C5X9CFG/PNP:DISABLE and then follow 
> that with a hard reset to ensure that it takes effect. 
> -----------------
> On 6 Feb 2001, at 19:56, Ming Chow wrote:
> 
> > I have a dual-boot Windows/Linux machine.  I still haven't had any 
> > networking capabilities for Linux, but I'm sure that my problem is due to 
> > that my ethernet card (3COM 509b) has PnP enabled.  How do I disable PnP on 
> > my ethernet card?  I recall that I need to download a small program to 
> > diable it (from DOS).

-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).



More information about the Discuss mailing list