Question for the Solaris/SPARC gurus.

[Robert L Krawitz]

   From: "Tim Lyons" <tlyons at digitalvoodoo.org>
   Date: Sun, 13 Jan 2002 02:11:30 -0500

   So I put the old memory back in it's original location and rebooted
   while apparently having left the diag-switch? Parameter set to
   true.  Now the box is repeating "Timeout waiting for ARP/RARP
   packet."  it seems to get through the first few POST tests and sees
   the old memory fine - I'm self-admittedly not a SPARC guy so this
   is all Greek to me.  All I know for sure is that it's not
   booting....

The diag boot device is probably set to the network.  Either turn
diag-switch? back off, or change the network boot device, or boot the
explicit device.

-- 
Robert Krawitz <rlk at alum.mit.edu>      http://www.tiac.net/users/rlk/

Tall Clubs International  --  http://www.tall.org/ or 1-888-IM-TALL-2
Member of the League for Programming Freedom -- mail lpf at uunet.uu.net
Project lead for Gimp Print/stp --  http://gimp-print.sourceforge.net

"Linux doesn't dictate how I work, I dictate how Linux works."
--Eric Crampton