Addressing ide-tape as a scsi-tape

John Abreau jabr at blu.org
Sun Mar 24 18:59:08 EST 2002


jbk <jbk at mail2.gis.net> writes:

> I have an Ide tape drive that I would like to
> address as a scsi drive. I have seen some sketchy
> documentation on doing this but no definitive
> Howto. Has anyone done this? From the CDwriting
> Howto I am lead to believe that I would follow a
> similar procedure.
> 
> Any insite would be appreciated

If you're looking for a hardware solution, you might ask at acard.com;
I've been considering their ARS-2000FU Bridge Smart product, which
is a bolt-on scsi controller for an ide hard drive. It may only work for
hard drives, but it wouldn't hurt to ask their tech support if it would
work for a tape drive.

    http://www.acard.com/eng/product/scside/ars-2000fu.html
    Tech Support: support at acard.com, +1-877-TW-ACARD (09:00AM - 09:00PM, 
EST)


-- 
John Abreau / Executive Director, Boston Linux & Unix 
ICQ 28611923 / AIM abreauj / JABBER jabr at jabber.org / YAHOO abreauj
Email jabr at blu.org / WWW http://www.abreau.net / PGP-Key-ID 0xD5C7B5D9
PGP-Key-Fingerprint 72 FB 39 4F 3C 3B D6 5B E0 C8 5A 6E F1 2C BE 99


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 344 bytes
Desc: not available
URL: <http://lists.blu.org/pipermail/discuss/attachments/20020324/1a2daab5/attachment.sig>


More information about the Discuss mailing list