Comcast and DVB

David Backeberg dave at math.mit.edu
Tue Mar 22 10:06:17 EST 2005


I don't know the answer to your question, but I'm interested in your 
setup.

Are you just trying to watch a raw feed from the card, or are you trying 
to capture the feed to a file? If the driver is working properly, it 
should have grabbed control of a device with a name like /dev/video0

I haven't tried out the HD stuff. It might be encrypted? I don't know if this
applies to your tuner card, but for my regular TV Hauppauge card, it needs to
know:
1) the encoding of the television signal: PAL, NTSC, etc.
2) which frequency to tune to. The frequencies of channels vary by country 
and cable vs. air. Usually you can find simple utilities that will 
change channels for you. I have a very simple small utility hard-coded for 
US-NTSC-cable that takes the channel number as an argument and tunes the 
right frequency on the card.

Did the HD3000 drivers come with a /utils directory? Check in there and 
see if there's a tool for this purpose.

-- 
David Backeberg (dave at math.mit.edu)
Network Staff Assistant
MIT Math Dept.
Rm. 2-332            (617) 253-4995

On Mon, 21 Mar 2005, Robert La Ferla wrote:

> Is it possible to watch "unencrypted" digital cable with Comcast using DVB 
> (w/QAM enabled)?  If so, dvbscan wants initial tuning data or at least one 
> transponder/channel.  What do I need to feed it for arguments to get it to 
> work?  I have a HD-3000 card.
>
>
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://olduvai.blu.org/mailman/listinfo/discuss
>
>



More information about the Discuss mailing list