Mounting command for a USB creative zen device

[jbk]

Doug wrote:
> Hello:
> 
> I am trying to use amarok to manage my music, and carry them around
> with my creative zen device.  Amarok wants to know the command.  I
> don't, but my desktop does, because it mounts it thinking its a
> camera.  I was able to find this in /proc/bus/usb/device:
> 
> T:  Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=041e ProdID=413e Rev= 1.00
> S:  Manufacturer=Creative Technology Ltd
> S:  Product=Creative Zen Vision:M
> S:  SerialNumber=F1B6D69CC14D1055
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbfs
> E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
> 
> Given this information, can the proper mount command be constructed?
> 
> Thanks,
> doug
> 

The gnome program 'gnomad2' mounts the Zen V Plus with no 
problem. You might be able to glean information from that to 
use in the udev configuration. My install of Fc6 did not 
recognize the Zen as any device.

Jim K-R

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.