[Discuss] OT: what is this cable for?

Jerry Natowitz j.natowitz at rcn.com
Wed Nov 2 12:41:40 EDT 2011


In theory, DB is 25 pin, DA is 15 pin.   In practice anything "D sized" is called DB: DB9 (serial), DB15 (VGA, three rows), etc.


---- Original message ----
>Date: Wed, 2 Nov 2011 09:37:22 -0700 (PDT)
>From: discuss-bounces+j.natowitz=rcn.com at blu.org (on behalf of Dan Kressin <dkressin at yahoo.com>)
>Subject: Re: [Discuss] OT: what is this cable for?  
>To: "Ricker, William" <William.Ricker at FMR.COM>,BLU Discuss <discuss at blu.org>
>
>Ferrites, that's it!  The ones on this cable actually appear very plastic and light weight, and are not snap-on.
>
>In any case, I have to apologize for the unintentional misinformation.  The Centronics end is actually 36-pin, and I had a vivid "picture memory" of its purpose this morning.  It connected the printer to My First Computer, a Laser 128 (Apple IIe/IIc clone).  Funny how memory works.. I can totally picture the cable running through the old computer desk, etc..
>
>So does anyone want to explain the difference between DB and DA?
>
>
>
>
>>________________________________
>>From: "Ricker, William" <William.Ricker at FMR.COM>
>>To: Dan Kressin <dkressin at yahoo.com>; BLU Discuss <discuss at blu.org>
>>Sent: Wednesday, November 2, 2011 11:23 AM
>>Subject: RE: [Discuss] OT: what is this cable for?
>>
>>>  Ribbon cable w/ two (the name escapes me ..) "ring things" to usually used to fight inductance.. 
>>
>>Snap-on Ferrite donuts actually *add* inductance, which rounds the corners of square wave digital signals, to prevent interference (both by and to) and/or induced spikes from lightning EMP. They come in a variety of specs which attenuate into progressively lower frequencies. Use the wrong one and you'll attenuate the desired signal too ! 
>>
>>(One more pedantic than I might object that fighting interference is fighting *mutual* inductance, but that's not a measurable inductance outside of cross-talk range.)
>>
>>Yes the DA-15 was used as Game/MIDI port on early IBM PC ISA sound cards. But the normal MIDI adapter cable would have been DA-15 to pair DIN-5 (or XLR3). Since the game port was re-used to drive all sorts of things, that's a possible origin, as are any custom frobistats. The C-50 / CN-50 was abused as an easy expansion interface for lots of pre-miniaturization devices -- it was originally a family or range of telco analog connectors for twisted pair snakes, eg multi-line phones & PBX to punchblock cabling, that was adopted for printers, re-adopted for SCSI-1, because it was available relatively cheap due to volume of telco use. As the RJ series has been adopted more recently. The C-36 had obscure computer uses, not sure if larger sizes were ever digitally 'appropriated'.
>>
>>Bill @ $DayJob
>>
>>
>_______________________________________________
>Discuss mailing list
>Discuss at blu.org
>http://lists.blu.org/mailman/listinfo/discuss



More information about the Discuss mailing list