[Discuss] Help with data migration

[Richard Pieri]

Greg Rundlett (freephile) wrote:
> I already calculated the performance of the transfer end-to-end, and found
> that it was too slow (<10 MB/s).  The READ/WRITE tests confirm that the
> bottleneck is the network.  So, I enabled the epel and remi repos for

Make sure you have CAT6 cabling. Pin the switch ports at 10GigE full
duplex. Pin the local ports at 10GigE full duplex. And get your network
administrator involved because that's his job.

-- 
Rich P.