[Discuss] Mothballing Synology NAS

Greg Rundlett (freephile) greg at freephile.com
Thu Feb 15 01:52:43 EST 2018


So what's the approximate cost for that equipment?  Just curious since I
don't have any clue what stuff goes for since I'm not in the habit of
building systems.

Greg Rundlett
https://eQuality-Tech.com
https://freephile.org

On Wed, Feb 14, 2018 at 8:33 PM, Richard Pieri <richard.pieri at gmail.com>
wrote:

> Finished the initial build and running Memtest now. Parts:
>
> Case: Fractal Design Node 304. Mostly for the six drive bays in a Mini
> ITX form factor.
>
> PSU: Corsair CX 450. Probably more power than I need but better to have
> the power and not need it than needing to replace the PSU.
>
> Motherboard: ASRockRack C236 WSI. One of the few Socket 1151 Mini ITX
> boards out there with ECC. Also, eight 6Gb/s SATA III ports on the board.
>
> CPU: Intel Core i3-7100. Reasonable price, reasonable performance,
> reasonable power consumption, and ECC support (i5 and i7 don't support
> ECC, go fig).
>
> RAM: Kingston ValueRAM 2133MHz DDR4 ECC, 8GBx2. High performance RAM in
> a box like this is a waste of money.
>
> Drives: 4GB WD Red NAS Storage. These will be swapped out of the
> Synology box. I'll finally be converting back to ZFS from Btrfs (the box
> has enough RAM and CPU to handle ZFS). I have a 120GB Samsung 850 EVO
> not doing anything which I plan to add for L2ARC.
>
> And a bunch of Monoprice SATA cables to connect the drives.
>
> First full Memtest pass just finished. No errors. Nice.
>
> --
> Rich P.
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://lists.blu.org/mailman/listinfo/discuss
>



More information about the Discuss mailing list