[HH] FRDM Platform (Freescale Freedom development platform)

[John Luciani]

It may not be compatible with the Arduino software but the Leaf-Labs
Arduino-like stuff could work.

(* jcl *)

On Sun, Oct 7, 2012 at 12:33 PM, Tom Metro <tmetro+hhacking at gmail.com>wrote:

> Federico Lucifredi wrote:
> > New device format from Freescale...
> >
> http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=FRDM-KL25Z
>
> Same thing as:
> http://www.mail-archive.com/hardwarehacking@blu.org/msg00491.html
>
> ?
>
>
> > Arduino-ish (shield comatible, even), but ARM-based...
>
> So low-speed, low-power microcontroller. Presumably not software
> compatible with the wealth of existing Arduino code.
>
>
> > The chip can be...run in the kilohertz range and at lower voltages
> > than 5V… I see some low-power applications...
>
> Interesting point.
>
>
> > and including a touch capacitor slider and an accelerometer on the board
> itself.
>
> Yes, unusual peripherals for a board like this.
>
> You skipped the best part of this board: it sells for only $13.
>
>  -Tom
> _______________________________________________
> Hardwarehacking mailing list
> Hardwarehacking at blu.org
> http://lists.blu.org/mailman/listinfo/hardwarehacking
>



-- 
http://www.wiblocks.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.blu.org/pipermail/hardwarehacking/attachments/20121007/510a0374/attachment.html>