RoadRunner and multiple computers

[gaf at blu.org (Jerry Feldman)]

I have AT&T BB (eg. Road Runner). I have always had multiple systems 
on my local area network. At first I was using my main computer either 
via LInux IP Masq or Windows Nat32. I have since installed a Cable 
Modem/DSL Router (eg. Linksys BEFSR41). I have 1 cable modem, and 
1 10/100 switch plugged into the router, and 7 cat5 cables going in a 
bunch of directions. The CableModem/DSL routers come in a few 
different configurations. The one I have had 4 switched ports so you do 
not need an additional hub or switch unless you want more than 4 
computers on the net. I also use a combination of dynamic and static IP 
addresses on my network. AT&T broadband allows you to have up to 5 
email addresses on a single account. The DSL/Cable Routers are a bit 
more expensive than hubs. The BEFSR41 runs somewhere about $120 
mail order (I have seen it as low as $105 on sale). Linksys also has an 8 
port. I also set up the Mac address on the router to be the same MAC 
address of my main machine, so if I ever need to go back to IP masq, I 
can do it witrhout calling AT&TBB. 



On 14 Mar 2001, at 15:59, Chris Janicki wrote:

> This isn't a direct Linux question, but I'm sure of you have the 
> expertise with cable Internet service...
> 
> RoadRunner offers a 1-computer and 3-computer option (you supply your own 
> hub).  Does anyone know how this hardware works?... can I place a router 
> in front of the 1-computer cable modem and extend the service?  Or does 
> the cable modem keep track of sessions or ethernet MAC addresses to limit 
> service?  Or is the real problem getting a fixed IP address to route through?
> 
> Thanks,
> Chris
> 
> >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
> 
> On 3/13/01, 7:48:48 PM, Ron Peterson <ron.peterson at yellowbank.com> wrote 
> regarding Re: Get to MIT via Red Line?:
> 
> 
> > David Kramer wrote:
> > >
> > > I'm changing jobs, and the new company (http://www.vality.com) is
> > > downtown.  Is there an easy way to get to MIT via the Red Line?
> > >
> > > If not, I'll have to go home to Waltham after work, then drive into
> > > Cambridge.  Not the end of the world, but the trip would go from 7 
> minutes
> > > to 60 minutes.
> 
> > Just to be an oddball I'll suggest you might also consider the Cental
> > Square stop.  The walk to MIT is just a bit longer, but if you're going
> > there after work, and you want something to eat on the way, Central
> > Square is your best bet.
> 
> > 
> http://www.mapquest.com/cgi-bin/ia_find?link=btwn%2Ftwn-map_results&uid=ub
> 2q01h1t4gcqbxd%3Az20f7alab&encrypted_lat=rlly2g&encrypted_lng=_a961sh&rand
> om=1167&event=poi_update&SNVData=3mad3-h.fy%2528waxguy_%2529z22h41%253bpq%
> 257cs9z%2Cp7%253b8aq.hqu%253b%2528a0%252bF%2513E%2515VYVGGM%2517JG%252b%25
> 12TS_R%2517FO%2514O%2515UJ%253aF%2513%253d6anlf_5l62_F%2515%252851a8wu%253
> a_a961xq%253aa%253bteqej%253bxmwjs8%25241w-u.wf7%253bxcx5sf7.grfe%257cs&ps
> earch_type=closest&select_num=5&pcat=8&mqcns_transit=mqcns_transit&update=
> Update+Map
> 
> > -Ron-
> > GPG and other info at: http://www.yellowbank.com/
> > -
> > Subcription/unsubscription/info requests: send e-mail with
> > "subscribe", "unsubscribe", or "info" on the first line of the
> > message body to discuss-request at blu.org (Subject line is ignored).
> -
> Subcription/unsubscription/info requests: send e-mail with
> "subscribe", "unsubscribe", or "info" on the first line of the
> message body to discuss-request at blu.org (Subject line is ignored).


Jerry Feldman <gaf at blu.org>
Associate Director
Boston Linux and Unix user group
http://www.blu.org
-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).