Hot sync and Treo 650 (solved)

[gaf at blu.org (Jerry Feldman)]

I was able to hot sync my Treo 650 on SuSE 9.2 with a 2.6.11 kernel. (I
haven't tried the stock kernel with the fix, below yet), so it might
work. Someone posted this on the SuSE list:


1. create file in /etc/udev/rules.d named 10-udev.rules and containing:
# Palm Handheld
BUS="usb",SYSFS{serial}="PalmSN12345678",NAME="pilot"

2. create a file in /etc/udev/permissions named 10-udev.permissions
containing:
# Palm Handheld rw
pilot*:root:usb:0666

The dlpsh command should work fine.

Note that with my Palm m130 I must use /dev/usb/ttyUSB0 and with the
Treo it is /dev/usb/ttyUSB1


The other problems I have not solved yet is how to merge my m130
databases onto the Treo. 
Initially, the Treo was identified as a different user because the m130
and the Treo had different user ids (same user name). The install-user
command can be used to set the user name and user id. One thing I was
too timid to try the other day was to backup my m130, then restore it to
the Treo. 
-- 
Jerry Feldman <gaf at blu.org>
Boston Linux and Unix user group
http://www.blu.org PGP key id:C5061EA9
PGP Key fingerprint:053C 73EC 3AC1 5C44 3E14 9245 FB00 3ED5 C506 1EA9
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.blu.org/pipermail/discuss/attachments/20050305/ccfa4c6d/attachment.sig>