Trouble uplinking a cisco catalyst 2960 to a 3600

[dsr at tao.merseine.nu (dsr at tao.merseine.nu)]

On Mon, Jun 12, 2006 at 09:25:24PM -0400, John Abreau wrote:
> The settings that resulted were as follows:
> 
>     interface FastEthernet0/48
>      switchport mode trunk
>      macro description cisco-switch
>      auto qos voip trust
>      spanning-tree link-type point-to-point
> 
> 
> I had set up the port on the 3600 as follows:
> 
>     interface FastEthernet0/18
>      description Catalyst 48-port switch
>      switchport trunk encapsulation dot1q
>      switchport trunk allowed vlan 1,2,4,8,12,1002-1005
>      switchport mode trunk
>      no cdp enable
> 
> which match the settings of the port the internal router is on,
> plus add in the rest of the vlan's.

encapsulation defaults to ISL; is 802.1q set on the catalyst?

-dsr-


-- 
-. ---   -- --- .-. .   ... . -.-. .-. . - ... 
..-. ..- -.-. -.-   - .... .   -. ... .- 
..-.   ..-   -.-. -.   .-. -..   - .... ...   ..-   -.- -. .--   -.-. -..