[Discuss] odd problem

[gaf.linux at gmail.com (Jerry Feldman)]

What happens if both keyboards are connected at the same time.

Are the nano dongles logitech or another brand. I assume they are Bluetooth
or is the wireless logitech proprietary. I'm wondering, after you login,
try removing the nano dongle for a few seconds and then plug it back in.
It's possible the login screen does a reset.

--
Jerry Feldman <gaf.linux at gmail.com>
Boston Linux and Unix http://www.blu.org
PGP key id: 6F6BB6E7
PGP Key fingerprint: 0EDC 2FF5 53A6 8EED 84D1  3050 5715 B88D 6F6
B B6E7

On Mon, Nov 15, 2021, 5:38 PM dan moylan <jdm at moylan.us> wrote:

>
> jerry feldman <gaf.linux at gmail.com> writes:
> > While I am not familiar with the nuc or the specific
> > keyboard. Could you try an old USB keyboard.
>
> i've just got the two logitec keyboards, both working off
> nano dongles.  but note that the keyboards work with no
> problems while typing in the password in the fc33 login
> screen, but not in the terminal after login.  the built-in
> touchpad on the keyboards works fine after login.
>
> edward <epp at sillydog.org> writes:
> >
> https://support.logi.com/hc/en-us/articles/360023464113-Wireless-Touch-Keyboard-K400-Plus-Technical-Specifications
>
> > According to this, it's 2.4GHz wireless. Since it sounds
> > like it and the original are operating erratically, is there
> > another device in close range that is also using 2.4Ghz? If
> > so, it could be interfering with the communications between
> > the keyboard and its receiver.
>
> same comment.  my home wireless net is at 5 GHz.
>
> > On Mon, Nov 15, 2021, 2:44 PM dan moylan <jdm at moylan.us> wrote:
>
> >> i've been happily running fc33 on an intel nuc-10 connected
> >> to an aoc monitor.  recently, i was attempting to connect
> >> the nuc to the 55 in lg tv over my mantel and had trouble
> >> with the logitec K404r keyboard.  when i summoned a terminal
> >> it came up, but the keyboard did not communicate.  the
> >> keyboard's built in touchpad worked fine, but the keypad
> >> itself did not connect.  moving back to the aoc monitor,
> >> same issue.
> >>
> >> aha, says i, the touchpad is fine, but the keyboard has
> >> somehow become faulty.  off to the microcenter, coming home
> >> with a logitec K400+ keyboard.  agrrragh!  same issue.
> >> note, however, that when the login screen came up, i was
> >> able to type in the password successfully, but after
> >> summoning a terminal -- total disconnect.
>
> ole frustrated dan
>
> j. daniel moylan
> 84 harvard ave
> brookline, ma 02446-6202
> 617-777-0207 (cel)
> jdm at moylan.us
> www.moylan.us
> [BLM]
> _______________________________________________
> Discuss mailing list
> Discuss at lists.blu.org
> http://lists.blu.org/mailman/listinfo/discuss
>