MediaOne and Linux (yet again)

[Peter R. Breton]

> Peter, you need to show us the output from "ifconfig" and "netstat -rn".
> I would want to see the 2 lines in your boot rc files that show how
> eth1 was handled.
> 
> I have usually been able to diagnose the net setup from that.
> 
> Have you taken the stuff out of the rc for eth0?  You could probably
> hack that to fix up eth1.


Here they is:

1. The kernel detecting the cards:

3c59x.c:v0.99E 5/12/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
loading device 'eth0'...
eth0: 3Com 3c905B Cyclone 100baseTx at 0xb800, 00:10:4b:98:e5:5a, IRQ 10
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation
interface.
  Enabling bus-master transmits and whole-frame receives.
loading device 'eth1'...
eth1: 3Com 3c905B Cyclone 100baseTx at 0xb400, 00:10:4b:cd:0a:c7, IRQ 11
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation
interface.
  Enabling bus-master transmits and whole-frame receives.

2. Output of ifconfig

[root at pbreton network-scripts]# ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          EtherTalk Phase 2 addr:0/0
          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
          RX packets:87 errors:0 dropped:0 overruns:0
          TX packets:87 errors:0 dropped:0 overruns:0

eth0      Link encap:Ethernet  HWaddr 00:10:4B:98:E5:5A
          inet addr:24.128.89.183  Bcast:24.128.89.255 
Mask:255.255.254.0
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2301 errors:0 dropped:0 overruns:0
          TX packets:20 errors:0 dropped:0 overruns:0
          Interrupt:10 Base address:0xb800 

eth1      Link encap:Ethernet  HWaddr 00:10:4B:CD:0A:C7
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          EtherTalk Phase 2 addr:65280/144
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:158 errors:0 dropped:0 overruns:0
          TX packets:124 errors:0 dropped:0 overruns:0
          Interrupt:11 Base address:0xb400 

3. Routing tables

[root at pbreton network-scripts]# netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
192.168.1.3     0.0.0.0         255.255.255.255 UH     1500 0          0
eth1
192.168.1.0     0.0.0.0         255.255.255.0   U      1500 0          0
eth1
24.128.88.0     0.0.0.0         255.255.254.0   U      1500 0          0
eth0
127.0.0.0       0.0.0.0         255.0.0.0       U      3584 0          0
lo
0.0.0.0         24.128.88.1     0.0.0.0         G      1500 0          0
eth0

4. /etc/sysconfig/network-scripts files:

emacs at pbreton(4) [10:13:12]% cat ifcfg-eth0
DEVICE=eth0
IPADDR=
NETMASK=
ONBOOT=yes
BOOTPROTO=dhcp
USERCTL=no

emacs at pbreton(5) [10:13:17]% cat ifcfg-eth1
DEVICE=eth1
USERCTL=no
ONBOOT=yes
BOOTPROTO=none
NETWORK=192.168.1.0
BROADCAST=192.168.1.255
NETMASK=255.255.255.0
IPADDR=192.168.1.1

Any clues welcomed... right now I'm mystified, and am back to thinking
that it may be the card after all.

				Peter
***
Subcription/unsubscription/info requests: send e-mail with subject of
"subscribe", "unsubscribe", or "info" to discuss-request at blu.org