Thanks for all your help (was: URGENT! Server can't access net anymore)

[Jerry Callen]

Bill Horne wrote:
> 
> 1. What does Plug-'n'-play do with interrupts?  I always thought they
> were cast in stone until I changed firmware/jumpers on a particular
> card.

No. As I understand it, at system reset the BIOS polls the slots and
assigns I/O "stuff" (IRQs, DMA, channels, whatever) as requested by the
card in each slot. I probably have the details wrong, but that's the 
general idea. The goal is to remove responsibility for this stuff
from the user and have the system figure it out automatically. This
unfortunately screws you if you really want to control the addresses so 
they match what Linux expects. In some cases there are workarounds;
the NICs I've used all come with a utility that allows you to set 
the addresses ("virtual jumpers", as it were), but in my experience
this then breaks things for Windows. Grr.
> 
> 2. Why would swapping the PCI slot cure this problem?  Wouldn't the
> problem follow the card if the interrupts are mismatched?

See above. The card no longer has a jumper-assigned address.

> 3. Does a cable modem require a reset to recognize a new MAC address?
> Does the reset, if needed, have to come from the head end, or can they
> be reset locally?

MediaOne does something from the head end.

However, most (all?) NICs can be told to use an arbitrary ethernet
address; you can set it with ifconfig.

-- Jerry Callen                      Mobile: 617-388-3990
   Narsil                            FAX:    617-876-5331
   63 Orchard Street                 email:  jcallen at narsil.com
   Cambridge, MA 02140-1328

   PGP public keys available from:
       http://www.nai.com/products/security/public_keys/lookup_key.asp
   fingerprints:
       DH/DSS key ID 0x1806252C: 7669 A4CD 759A 6EB7 AF04
                                 C10D B659 2A4B 1806 252C
       RSA    key ID 0x99F7AAE5: D265 DC9C 13FD 6110 
                                 30F5 1874 A206 24B1
-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).