Palm Pilot/Visor and Linux questions

[Mark Komarinski]

Gerald A Feldman wrote:

> Most of the new Pilots and Visors are USB, so my questions are:
> 1. Can I use the pilot-link and Jpilot through a USB port (2.4+ kernel).


Pilot-link, yes.  You'll want to have USB serial and visor compiled into
the kernel, or as modules.  The port will be something like
/dev/ttyUSB1, but the port won't be available until about 1 second *after*
you hit the hot-sync button.  So, hit hot sync button, wait, then start
pilot-link.  You can get a bit more info at www.linux-usb.org


> 2. Can I use my current serial cradle with the newer Palms (I'll probably
> opt for a low end Palm III or possibly a Handspring Visor). The main
> reason is that I want to upload my previously synced data to the new Palm
> or Visor. (Essentially, I want to be able to place it in the existing
> cradle and perform a pilot-xfer). 


I went from a Palm III to Visor, and was able to back up my palm using pilot-link,
attach the Visor through its cradle, then do a restore.  Worked fine.


-Mark


-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).