Fuji digital camera installation

[Michael MacDonald]

I have this same camera, it works perfectly in linux or any other os 
that supports usb mass storage devices. The camera itself shows up as a 
USB storage device and works fine with the drivers in the kernel. Just 
make the USB mass storage device module is enabled in the kernel and you 
have a mount point for your camera... It should work like this..
dmesg should say this once camera is plugged in and turned on...
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 7
usb.c: kmalloc IF d59acc00, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=3
usb.c: USB device number 7 default language ID 0x409
Product: USB Mass Storage
SerialNumber: Y-301^^^^^130107W0FC0003028152
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 5
usb-storage: Array length appears to be: 61
usb-storage: Vendor: Fujifilm
usb-storage: Product: FinePix 1400Zoom
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xcbbb2e00 Out: 0xcbbb2e14 Int: 0xcbbb2e28 
(Period 1)
usb-storage: Found existing GUID 04cb01000700fc0003028152
usb-storage: Allocating IRQ for CBI transport
usb-storage: usb_submit_urb() returns 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 7
usb.c: usb-storage driver claimed interface d59acc00
usb.c: kusbd: /sbin/hotplug add 7

The device is then automatically assigned to /dev/sda1 or a higher 
number depending on if you have other scsi drives. You can then mount it 
by doing this..
mkdir /camera    <--create mount point
mount -t vfat /dev/sda1 /camera    
pictures from camera will now be located in /camera. copy to your hard 
drive and enjoy.

Michael MacDonald
macado at nonaferraris.com

John J. Cruz wrote:

> Has anyone had any luck installing the Fuji digital camera 2600zoom 
> with Red Hat Linux 8.2?
>  
> John
>