D-Link firewall with Linux
miah
jjohnson at sunrise-linux.com
Thu Mar 27 10:01:24 EST 2003
Sorry to hear that the linksys didn't work. I've heard alot of complaints from friends about theirs, but mine runs fine, I'm very happy with it. I want to replace it though, with something from snapgear.com, probably their LITE+, a little more expensive than a linksys or d-link, but its running linux and you can ssh into it and administer it =).
Maybe the lameserver errors are occuring because of the odd system time values.
-miah
On Thu, Mar 27, 2003 at 08:31:35AM -0500, Rich Braun wrote:
> After years of running Linux as my firewall (reasonably happily, aside
> from an occasional crash caused by a defective tape drive), I decided
> to buy one of those cheapo firewall boxes. Candidates were the
> Linksys BEFSX41 and the D-Link DI-604 (as per the current PC Magazine
> reviews). The Linksys went back to Microcenter yesterday, after about
> 3 hours of service--it wouldn't stay up for more than an hour at a
> time, before going into a repeated software-reboot cycle.
>
> Bring on the D-Link. It costs less and runs solid but I have an issue
> similar to one raised by someone last October (google for 'named
> di-604' in newsgroups). My caching DNS server gets a whole lot of
> lame-server errors and timeouts when I set it up behind this NAT box.
> There isn't enough debugging capability in the router for me to figure
> this one out. I'm running 2.18 firmware, which has one other odd bug:
> its system time reports wild values, whether NTP is turned on or not.
>
> The DNS errors did not happen with the Linksys, so I'm pretty sure
> it's not a problem in the Linux config.
>
> Has anyone experimented with these broadband-router firewall boxes?
>
> Oh, and lest anyone else get suckered in by Linksys' marketing hype: their
> firewall firmware is available ONLY in the BEFSX41 unit. Packaging for
> various other products hints that it's included but it isn't.
>
> -rich
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://www.blu.org/mailman/listinfo/discuss
More information about the Discuss
mailing list