Sun StorageArray A1000 not seen by probe-scsi-all

[Jerry Feldman]

We had a case with a Sparc where we had a SCSI II device but the controller 
only recognized device IDs 0-7. Don't think that's your problem, but 
seriously check your SCSI controller. Sun recommended that we get an 
Adaptec controller :-)
John Abreau wrote:
> I'm trying to install a new Sun E250 server with an external Sun StorEdge
> A1000 disk array, and I can't get the E450 to recognize the A1000 at all.
> I'm running probe-scsi-all at the ok prompt; it shows two scsi
> controllers, and the internal disk and cdrom drive, but it doesn't detect
> the four disks in the A1000. The manuals provided are no help; they assume
> that this works fine, and suggest jiggling the cables to be sure they're
> tight. 
-- 
Jerry Feldman <gaf at blu.org>
Boston Linux and Unix user group
http://www.blu.org


-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).