Linksys BEFSR81 and remote logins?

Jerry Feldman gaf at blu.org
Thu Mar 29 07:26:06 EST 2001


Yes. First, for each box you want to telnet or ssh to, you need to set up 
forwarding of the port. This requires that you set up a static ip address 
for the boxes you want to telnet or ssh to. Normally, the Linksys box uses 
192.168.1.100 as the first dhcp IP address, so you should assign a static 
address of 192.168.1.x to those boxes (where x is 2 <= x < 100).  Then log 
into the linksys box, click on advanced, then click on forwarding. The 
forwarding menu is straight forward. You can forward any port. You can also 
assign one of the hosts as a DMZ host. You also should be running firmware 
rev. 1.37 or later.  I don't recall which, but either 1.35 or 1.36 had a 
serious bug in it.

Scott Ehrlich wrote:
> Hello to all:
> 
> I just installed a new Linksys BEFSR81 gateway/router in my home network
> (RCN for cable and Internet).  I have five machines which are configured
> via the 192.168 private network.
> 
> Given the Linksys is the filter now between my PCs and the Internet, is
> there any way I can remotely log in to my machines from the outside world?
> I have two Windows boxes (NT 4 and 2000) and two UNIX boxes (Linux and
> Solaris).
> 
> Thanks in advance.
> 
> Scott
> 
> -
> Subcription/unsubscription/info requests: send e-mail with
> "subscribe", "unsubscribe", or "info" on the first line of the
> message body to discuss-request at blu.org (Subject line is ignored).
> 

-- 
Jerry Feldman <gaf at blu.org>
Boston Linux and Unix user group
http://www.blu.org


-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).



More information about the Discuss mailing list