hda: lost interrupt

Gregory Boyce gboyce at badbelly.com
Thu Oct 14 22:09:00 EDT 2004


And hopefully you don't do anything disk intensive.  I find the
difference in disk speed incrediably noticable with DMA turned off.  

A quick transfer rate test (hdparm -T /dev/hda) on my laptop shows 26.70
MB/sec with DMA and 2.92MB/s without it.  On top of that, transferring
large files in PIO mode (dma disabled) is rather CPU intensive.

Mike,

If this is a custom built machine, you might want to check the IDE
cable.  If the hard drive is UDA-33 or above then you need an 80 pin IDE
cable rather than a 40 pin cable.  Using a 40 pin cable can cause a
number of problems including lost interrupts.

Another possibility is APIC problems.  One site I found after a quick
search suggesting turning off apic (noapic option on the kernel
commandline).

On Wed, 2004-10-13 at 13:53, miah wrote:
> My guess is that you haven't even bothered to google for the answer..
> 
> Results 1 - 10 of about 7,200 for hda: lost interrupt. (0.29 seconds)
> 
> So much time saved by looking for the answer rather than asking for
> help.
> 
> The basic answer is, disable dma on your drive.  You can do that with
> boottime by adding 'hda=nodma' to your lilo.conf/grub menu.lst, or
> hdparm -d 0 /dev/hda.
> 
> -miah
> 
> On Wed, Oct 13, 2004 at 01:36:53PM -0400, Mike Gorse wrote:
> > Lately I've been noticing lots of these messages in the logs, especially 
> > when my hard disk is busy (ie, a cron job runs at midnight which I believe 
> > updates the local database, and I have 40 of these messages in the logs 
> > starting at 00:00:12 and ending at 00:09:33), and it seems to take a long 
> > time to access things on the drive sometimes.  Do any of you know what 
> > might be going on?  Is my drive about to crash?
> > 
> > Thanks,
> > 
> > -- Michael Gorse / AIM:linvortex / http://mgorse.home.dhs.org --
> _______________________________________________
> Discuss mailing list
> Discuss at blu.org
> http://www.blu.org/mailman/listinfo/discuss
-- 
Gregory Boyce <gboyce at badbelly.com>




More information about the Discuss mailing list