Recommended hot-plug eSATA PCI cards?

Scott Ehrlich srehrlich-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org
Sat Apr 10 14:13:36 EDT 2010


lspci shows the card just fine.   The eSATA hard drive works just
fine.   If the eSATA drive is plugged into the PC while the PC is
already powered on, the drive is not seen.  I'm not looking to boot
from the eSATA drive.  Simply interact with it.

But, if the PC is restarted, but the eSATA drive remains powered on
and plugged into the PC, then Linux sees the drive.

I happen to be using a startech PCI card whose documentation says
nothing about having a hot-pluggable eSATA port and happens to use VIA
chipset.   I say these as a point of information (aka fyi).

Documentation on at least one Promise eSATA card does say the eSATA
port is hot-pluggable.

Scott

On Sat, Apr 10, 2010 at 1:51 PM, Peter Petrakis
<peter.petrakis-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
> eSATA is hotpluggable by design. It's not card that's the problem,
> it's the driver and/or the userspace tools which manage the mounting.
> Is it not showing up after you plug it in? If so try doing a scsi bus scan.
>
> http://www.ibm.com/developerworks/wikis/display/linuxp/scsi+-+hot+add,+remove,+rescan+of+scsi+devices
>
> or more to the point,
> echo "- - -" > /sys/class/scsi_host/hostX/scan
>
> where X is the host representing your esata controller.
>
> Peter
>
>
> On Sat, Apr 10, 2010 at 8:19 AM, Scott Ehrlich <srehrlich-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
>> I have a mix of older and newer PCs, some of which only have PCI
>> cards, but most which run Linux that need a PCI card that support
>> hot-plugging of an external eSATA-capable USB drive.
>>
>> I've seen models from Adaptec, Addonics, Promise, among others.
>> Which models do you use and what would you recommend?
>>
>> I only need the ability to back up and transfer data quickly, but with
>> the added benefit of adding/removing the drive whenever I want.
>>
>> I currently have a non hot-plug eSATA card, but I need to reboot the
>> machine whenever the external drive as been disconnected for it to be
>> seen again.
>>
>> Thanks.
>>
>> Scott
>> _______________________________________________
>> Discuss mailing list
>> Discuss-mNDKBlG2WHs at public.gmane.org
>> http://lists.blu.org/mailman/listinfo/discuss
>>
> _______________________________________________
> Discuss mailing list
> Discuss-mNDKBlG2WHs at public.gmane.org
> http://lists.blu.org/mailman/listinfo/discuss
>





More information about the Discuss mailing list