[HH] Opening a skull (on topic, honest!)
Greg London
email at greglondon.com
Tue May 1 19:29:27 EDT 2012
If you want it to 'snap' shut, maybe you want a cam or something out of
round. The part that sticks out pushes down. then when the cam rotates far
enough, it snaps shut.
Connected by DROID on Verizon Wireless
-----Original message-----
From: Mark Komarinski <mkomarinski at wayga.org>
To: hardwarehacking at blu.org
Sent: Tue, May 1, 2012 21:20:07 GMT+00:00
Subject: Re: [HH] Opening a skull (on topic, honest!)
On 5/1/12 4:53 PM, Tom Metro wrote:
> Mark Komarinski wrote:
>> The tension that's required to open it is too much for the
>> servo that I have. I was thinking a linear actuator...
> A solenoid is the obvious thing that comes to mind:
>
http://www.halted.com/commerce/catalog/product.jsp?product_id=13355&czuid=133
5905228724
>
http://www.allelectronics.com/make-a-store/item/SOL-102/MINIATURE-12VDC-PUSH-
TYPE-SOLENOID/1.html
>
> Of course with a solenoid you're pretty much stuck with a fast acting,
> full travel motion. If you want to some day animate the mouth to sync to
> speech or something, then it wouldn't be the right choice.
>
>
Ah, a friend gave me one that is in two pieces (the inner shaft can be
removed from the solenoid). The range of movement was rather small but
after thinking about it may be enough to get the jaw to open. I'll
fiddle with it a bit more and maybe find a larger servo (thanks Drew).
Expect more stupid questions.
-Mark
_______________________________________________
Hardwarehacking mailing list
Hardwarehacking at blu.org
http://lists.blu.org/mailman/listinfo/hardwarehacking
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.blu.org/pipermail/hardwarehacking/attachments/20120501/fde6ead5/attachment.html>
More information about the Hardwarehacking
mailing list