[HH] drive two monitors with a Raspberry Pi
Federico Lucifredi
flucifredi at acm.org
Thu Sep 11 06:55:42 EDT 2014
> The VGA expansion board, “is likely to have issues with EMC,” which means this probably won’t be a product.
Can anyone explain this?
Best -F
On Sep 10, 2014, at 9:41 PM, Tom Metro <tmetro+hhacking at gmail.com> wrote:
> Gert van Loo (of Gertboard fame) figured out how to get the Raspberry
> Pi's GPU to drive the GPIO pins, which if equipped with a simple
> resistive ladder D-to-A converter, can then drive a VGA monitor. Between
> that and the existing HDMI port you can drive two displays. Clever.
>
> http://hackaday.com/2014/09/10/raspberry-pi-gets-vga-dual-screen-support/
>
> (Required a model B+ in order to have enough GPIO pins.)
>
> -Tom
> _______________________________________________
> Hardwarehacking mailing list
> Hardwarehacking at blu.org
> http://lists.blu.org/mailman/listinfo/hardwarehacking
>
_________________________________________
-- "'Problem' is a bleak word for challenge" - Richard Fish
(Federico L. Lucifredi) - flucifredi at acm.org - GnuPG 0x4A73884C
More information about the Hardwarehacking
mailing list